- Store
- >
- Krautkramer SpotChecker
Krautkramer SpotChecker
SKU:
$3,857.00
$3,857.00
Unavailable
per item
Features:
SpotChecker “completes” our existing USLT product line for spot weld testing. It offers true portability with a rugged, environmentally protective housing. The key difference between this product and existing spot weld testing solutions is its size/weight, environmental protection and user friendly operating.
Unique user interface to operate a pointing device by two trackballs
Touchscreen operation for direct access of different functions and settings on a big 8.4 inch LCD.
Modern PC interfaces, including USB and wireless connection (WLAN, BlueTooth)
Remote control like USLT 2000
Ease of use for untrained inspectors (Application Specific Software UltraLOG)
Compatible with other USLT 2000 solutions
Hot swap battery exchange for continuous operation
Environmentally protected according IP65
Weight approx. 3.2 kg including batteries.
Spectification:
Storage Temperature -20 to +60 °C (-4 to +140°F)
Operating Temperature 0 to +45 °C (32 to 113°F)
Dimensions W 225 × H 314 × D 94 mm (W 8.85 x H 12.36 x D 3.7”)
Weight Approx. 3.2 kg (7.05 lb) (Incl. Batteries)
Protection Rating IP 65
Shock Resistance According to EN 600 68-2-27
Vibration Resistance According to IEC 600 68-2-6 Fc
Display 8.4” TFT, SVGA, Touchscreen
Control Devices 2 × Trackball with 2 Buttons Each, 6 Function Keys, Touchscreen
Connections
Probes 2 × LEMO 00 Triax
Power Supply Unit 1 × LEMO 0S, 4-pin Socket
Network 1 × RJ45
USB 4 × USB Type A Socket, 1 × USB Type B Socket
Optional WLAN, Bluetooth
Power Supply
Operating Voltage 15 V DC
Power Consumption Approx. 22 W
Batteries 2 × Lithium-Ion 10.8 V, 4.8 Ah
Operating Time Approx. 4.0 h with 2 Batteries
Power Supply Unit External Power Supply Unit 100 ... 230 V AC, Max. 70 W
Ultrasound
Pulser Type Spike Pulse
Pulse Repetition Frequency (PRF) Max. 1,000 Hz, No Continuous Pulse Sequence
Voltage Max. 400 V
Initial Pulse Rise Time 15 ns
Damping 50 Ohm
Settings and Evaluation
Calibration Ranges Min. 0 to 2.5 mm (0 to 0.1”) (steel); max. 0 to 9,700 mm (0 to 381”) (steel)
Sound Velocity Range 500 ... 15,000 m/s (0.02 ... 0.59 “/µs) Integrated, Editable Material Table
Pulse Shift -10 to 1,500 mm (-0.39 to 50”) (steel)
Probe Delay 0 to 100 µs
Frequency Range 2 to 20 MHz (–3 dB)
Gain 110 dB, Adjustable in Steps of 0.5/1/2/6 dB
Rectification Full-Wave
Monitor Gates 2 Independent Monitor Gates, Adjustable over the Entire Maximum Calibration Range; Evaluation on the Basis of A-scan at Display Refresh Rate
Distance Measurement - Initial Pulse and Measurement Point in Gate A or B
- Measuring Points: Gate B – Gate A (Differential Measurement)
Measurement Resolution Sound Path/Time of Flight: up to 12.6 mm: 0.01 mm; Otherwise 0.2 % of Display Width
Amplitude 0.5 % Screen Height or 0.2 dB
A-scan Digitization 1,024 × 1,024 Pixels
Display Freeze Static A-scan Freeze, Dynamic A-scan Freeze (Freeze Box)
Echo Comparison Simultaneous Display of the Currently Active Signal and a Stored A-scan
Dialog Languages German, English, French, Spanish, Italian, Chinese, Japanese
Units mm
SpotChecker “completes” our existing USLT product line for spot weld testing. It offers true portability with a rugged, environmentally protective housing. The key difference between this product and existing spot weld testing solutions is its size/weight, environmental protection and user friendly operating.
Unique user interface to operate a pointing device by two trackballs
Touchscreen operation for direct access of different functions and settings on a big 8.4 inch LCD.
Modern PC interfaces, including USB and wireless connection (WLAN, BlueTooth)
Remote control like USLT 2000
Ease of use for untrained inspectors (Application Specific Software UltraLOG)
Compatible with other USLT 2000 solutions
Hot swap battery exchange for continuous operation
Environmentally protected according IP65
Weight approx. 3.2 kg including batteries.
Spectification:
Storage Temperature -20 to +60 °C (-4 to +140°F)
Operating Temperature 0 to +45 °C (32 to 113°F)
Dimensions W 225 × H 314 × D 94 mm (W 8.85 x H 12.36 x D 3.7”)
Weight Approx. 3.2 kg (7.05 lb) (Incl. Batteries)
Protection Rating IP 65
Shock Resistance According to EN 600 68-2-27
Vibration Resistance According to IEC 600 68-2-6 Fc
Display 8.4” TFT, SVGA, Touchscreen
Control Devices 2 × Trackball with 2 Buttons Each, 6 Function Keys, Touchscreen
Connections
Probes 2 × LEMO 00 Triax
Power Supply Unit 1 × LEMO 0S, 4-pin Socket
Network 1 × RJ45
USB 4 × USB Type A Socket, 1 × USB Type B Socket
Optional WLAN, Bluetooth
Power Supply
Operating Voltage 15 V DC
Power Consumption Approx. 22 W
Batteries 2 × Lithium-Ion 10.8 V, 4.8 Ah
Operating Time Approx. 4.0 h with 2 Batteries
Power Supply Unit External Power Supply Unit 100 ... 230 V AC, Max. 70 W
Ultrasound
Pulser Type Spike Pulse
Pulse Repetition Frequency (PRF) Max. 1,000 Hz, No Continuous Pulse Sequence
Voltage Max. 400 V
Initial Pulse Rise Time 15 ns
Damping 50 Ohm
Settings and Evaluation
Calibration Ranges Min. 0 to 2.5 mm (0 to 0.1”) (steel); max. 0 to 9,700 mm (0 to 381”) (steel)
Sound Velocity Range 500 ... 15,000 m/s (0.02 ... 0.59 “/µs) Integrated, Editable Material Table
Pulse Shift -10 to 1,500 mm (-0.39 to 50”) (steel)
Probe Delay 0 to 100 µs
Frequency Range 2 to 20 MHz (–3 dB)
Gain 110 dB, Adjustable in Steps of 0.5/1/2/6 dB
Rectification Full-Wave
Monitor Gates 2 Independent Monitor Gates, Adjustable over the Entire Maximum Calibration Range; Evaluation on the Basis of A-scan at Display Refresh Rate
Distance Measurement - Initial Pulse and Measurement Point in Gate A or B
- Measuring Points: Gate B – Gate A (Differential Measurement)
Measurement Resolution Sound Path/Time of Flight: up to 12.6 mm: 0.01 mm; Otherwise 0.2 % of Display Width
Amplitude 0.5 % Screen Height or 0.2 dB
A-scan Digitization 1,024 × 1,024 Pixels
Display Freeze Static A-scan Freeze, Dynamic A-scan Freeze (Freeze Box)
Echo Comparison Simultaneous Display of the Currently Active Signal and a Stored A-scan
Dialog Languages German, English, French, Spanish, Italian, Chinese, Japanese
Units mm