Fisher PHASCOPE PMP10 DUPLEX
SKU:
$1,344.00
$1,344.00
per item
Whenever a one-step-thickness-measurement of individual layers of a lacquer on zinc on iron coating or of a lacquer on aluminum coating is required, the PHASCOPE® PMP10 DUPLEX is the right instrument, That makes the PMP10 DUPLEX the ideal instrument for the modern automotive industry where body parts out of zinc plated steel and aluminum are mixed.
The PHASCOPE® PMP10 DUPLEX has three principles for coating thickness measurement ideally combined; the phase-sensitive eddy current method, the amplitude-sensitive eddy current principle and the magneto-inductive method.
Using the phase-sensitive method the thickness of a zinc coating on iron can be determined regardless the thickness of a covering lacquer coating. In addition the entire thickness of lacquer and zinc coating is measured using the magneto-inductive method. That makes it easy to determine the whole composition and individual thicknesses.
Due to the phase-sensitive eddy current method the PMP10 DUPLEX is capable to measure under a lacquer coating very precisely the zinc coating with a thickness between 0µm and about 100µm. That makes it superior to conventional eddy current thickness gauges, without the need of a special phase adjustment or the need for an increased measurement frequency to compensate thickness variations of the zinc layer.
Typical applications are all applications where DUPLEX coatings are used:
the automotive industry, car body painting, brake line tubes, etc.
The PHASCOPE® PMP10 DUPLEX has three principles for coating thickness measurement ideally combined; the phase-sensitive eddy current method, the amplitude-sensitive eddy current principle and the magneto-inductive method.
Using the phase-sensitive method the thickness of a zinc coating on iron can be determined regardless the thickness of a covering lacquer coating. In addition the entire thickness of lacquer and zinc coating is measured using the magneto-inductive method. That makes it easy to determine the whole composition and individual thicknesses.
Due to the phase-sensitive eddy current method the PMP10 DUPLEX is capable to measure under a lacquer coating very precisely the zinc coating with a thickness between 0µm and about 100µm. That makes it superior to conventional eddy current thickness gauges, without the need of a special phase adjustment or the need for an increased measurement frequency to compensate thickness variations of the zinc layer.
Typical applications are all applications where DUPLEX coatings are used:
the automotive industry, car body painting, brake line tubes, etc.
